THICK MATERIAL MANUAL END CUTTER ST-288C   
 
Anewly developed thick material lay cutting machine. The st-288c is specially designed to cut through certain materials that are usually difficult for cutting.
It works to facilitate towards easier and faster cutting, thus achieving Optimal efficiency, it saves material, time and labor.
 Model£ºST-288H  thick material end cutte (half set)
          ER-109   rear cloth press
          ST-288C=ST-288H+ER-109  
              Thick mstetrial end cutter (complete set)
Voltage£º 100¡«110V/220¡«240V 50¡«60Hz  1ø
 Specifications£ºKnife size:100mm,octagon/round
                    Rail size: 48¡å¡«144¡å
Applications£ºpvc,rubber,carpet,eca¡­etc
Cut capacity£º 25mm

   STRAIGHT AND BIAS FABRIC END CUTTER ST-460C   
 
This machine can cut cloth along any angle from 30-45,depending on the user¡¯s requirements.This machine is suitable for many projects,from cutting cloth for ties,aprons,formal dresses,and so on.
Model£º
 ST-460H straight and bias fabric end cutter(half set)
 ER-490  manual bias cloth press
 ST-460C=ST-460H+ER-409  
     Straight and bias fabric end cutter(complete set)
Voltage£º100¡«110V/220¡«240V 50¡«60 Hz 1ø
Specifications£ºKnife size:100mm,octagon/round
                    Rail size: 48¡å¡«144¡å

Applications£ºall cloth, thin plastic,¡­etc

Cut capacity£º30mm

   LEAVING MANUAL END CUTTER LST-360C   
 
The leaving manual end cutter designed for a particularly long rail,which the 260 and/or the 360 series may not be suitable for.
 Under the main machine body,there is a sensor switch which will allow the user to start cutting the cloth with just a slight push of a button.
Model£ºLST-360H leaving manual end cutter(half set)
          ER-109   manual cloth press
          LST-360C=LST-360H+ER-109  
               Leaving manual end cutter(complete set)
Voltage£º100¡«110V/220¡«240V 50¡«60 1ø
Specifications£ºKhife size:4-1/4¡åround
                     Rail size:48¡å¡«144¡å
Applications£ºall cloth, thin plastic,¡­etc
Cut capacity£º30cm
Last Page £¬Next Page  Page:2/2